草成人在线观看,玖玖玖亚洲精品,2008高清一道国产,av免费在线观看网站不卡顿

Language
News
News

With years of experience in designing and assembling complete sets of generator sets

What are the installation specifications for diesel generator sets

Time:2022-12-02

1、 Requirements for installation site of diesel generator sets

1. The installation site of the diesel generator set should have good ventilation, with sufficient air inlet at the generator end and good air outlet at the diesel engine end. The area of the air outlet should be more than 1.5 times the area of the water tank.

2. The surrounding area of the installation site for diesel generator sets should be kept clean, and items that can produce corrosive gases and vapors such as acid and alkali should be avoided from being placed nearby. If conditions permit, fire extinguishing devices should be installed.

3. When used indoors, smoke exhaust pipes must be connected to the outside, with a diameter equal to or greater than the exhaust pipe diameter of the muffler. The number of bends in the connected pipes should not exceed three to ensure smooth smoke exhaust, and the pipes should be tilted down 5-10 ° to prevent rainwater from entering; If the drainage pipe is installed vertically upwards, a rain cover must be installed.

4. The shell of the diesel generator set must have reliable protective grounding. For generators that require direct grounding of the neutral point, it must be grounded by professional personnel and equipped with lightning protection devices. It is strictly prohibited to use the grounding device of the mains for direct grounding of the neutral point. The bidirectional switch with the mains power must be very reliable to prevent reverse power transmission. The reliability of the wiring of the bidirectional switch needs to be inspected and approved by the local power supply department.

2、 Scope of diesel engineering construction

1. The diesel generator set and distribution installation project includes: generator set, grounding resistance cabinet, parallel cabinet, all high and low voltage cables, distribution cabinet and other electrical equipment.

2. The installation project of the oil supply system includes indoor oil pipes, PLC oil supply control system, related wires and cables, and other equipment materials and installation of the oil supply system.

3. The environmental protection treatment of diesel generator room and the installation of the intake and exhaust system in the generator room include but are not limited to the following:

(1) Installation of air intake and exhaust silencing systems, wall and ceiling sound absorption and insulation devices, sound insulation and fire doors, smoke exhaust silencers, smoke pipes, etc.

(2) Mechanical exhaust air in the computer room: The intake air is directly drawn from the first floor intake layer through a fan, while the exhaust air is used to exhaust the heat generated by the operation of the unit from the exhaust air to the outside.

(3) The exhaust gas is discharged to the outside through stainless steel chimneys and ground exhaust measures are taken. The design and construction of smoke exhaust and environmental protection for generator sets, including exhaust gas purification treatment, stainless steel chimneys from the machine room to the outdoor, and outlet fabrication.

4. The civil engineering of the computer room and the foundation of the unit, excavation of walls, closing of the computer room, and fire protection of the computer room are all handled by other professional manufacturers outside of the installation of the generator set.

5. The relevant engineering content of the water supply and sewage pipes in the computer room leading to the computer room shall be the responsibility of other professional engineering manufacturers outside of the generator installation and transfer project.

6. The unit transportation project requires the installation of generator sets in the basement of the equipment room, and a detailed and reasonable transportation plan should be made based on the actual situation on site.

Guangzhou Saiwei Energy Technology Co., Ltd. is a comprehensive enterprise specializing in the design, production, and installation of generators. Guangzhou Saiwei has many years of experience in engineering design and installation services. For many years, Guangzhou Saiwei has been committed to providing every customer with comprehensive products and energy solutions, including technical consulting, whole machine and generator supply, operation training, etc., with leading technology and first-class quality. The product range covers land diesel generator sets, marine generator sets, high-voltage generator sets, etc., and is widely used in industries such as power, communication, iron towers, healthcare, financial systems, data centers, etc. Welcome to inquire: 13302262088